Raymarine ST5000+, Руководство пользователя

Страница: 37 / 108

Chapter 4: Customising the ST5000 Plus
25
Heading alignment (ALIGN HDG)
The heading alignment screen is used to align the autopilot compass
with the ship’s compass.
• Steer your vessel onto a known heading.
• Adjust the displayed heading using the
-1
,
+1
,
-10
and
+10
keys.
• Check the autopilot display on various headings and adjust as
necessary.
Heading mode (HDG MAG/TRUE)
Select either magnetic or true heading mode. When heading data is
displayed in normal operation, the screen indicates whether true or
magnetic mode has been selected.
Bar selection (RUDD BAR/STEER BAR/NO BAR)
Select the type of bar graph that is shown at the bottom of the displays.
The options are as follows:
RUDD BAR
: This shows the rudder position, and is the default setting for
Hydraulic systems. Note that a rudder reference transducer is required
for accurate rudder position information.
STEER BAR
: This is the default setting for Sterndrive systems. The bar
graph is used as follows:
Mode Bar
Standby Rudder bar for systems with a rudder reference transducer
Auto compass Heading error bar
Track Cross Track Error (XTE) bar
Data pages (DATA PAGE)
The next 7 User Setup pages allow the settings for the Data Pages to be
modified. These are the SeaTalk/NMEA data pages available during
normal operation (see section
2.5 ).
Each setup page initially shows the title
DATA PAGE
. After 1 second,
this changes to the title of the data currently set for that page.
132_4c04.p65 14/06/99, 10:33 25