Raymarine SmartPilot S1 Tiller Pilot, Руководство по вводу в эксплуатацию

Страница: 50 / 76

38 S1 Wheel and Tiller Pilots Commissioning Guide
Display Calibration screens
Display bar selection
This screen allows you to select what information is displayed at the bottom of the
SmartPilot display.
Heading selection
This screen allows you to display any heading as either a magnetic or true value.
During normal SmartPilot operation the screen will indicate MAG for magnetic
headings and TRUE for true headings.
Data pages
SmartPilot controllers have 15 userconfigurable pages. The following screens
allow you to modify the settings for the data pages. These define which SeaTalk/
NMEA data pages will be available during normal operation (see SmartPilot
Operating Guide). Each data page setup screen initially shows the title DATA
PAGE and the page number. After 1 second, the text changes to the title of the
data set for that page.
The default settings are:
Options
RUDD BAR
(Default)
Rudder position bar. It uses the bar graph to show the true
rudder angle. Requires rudder position sensor for accurate
rudder information.
BAR OFF
(Recommended for S1
TillerPilot systems)
No bar is displayed
Options
HDG MAG
Magnetic heading
HDG TRUE
True heading.
Data Page Default Setting
1 XTE
(Cross Track Error)
2 BTW
(Bearing to Waypoint) see Note below
3 DTW
(Distance to Waypoint) see Note below
81282_1.book Page 38 Monday, October 2, 2006 1:58 PM