Raymarine SmartPilot S1 Tiller Pilot, Руководство по вводу в эксплуатацию

Страница: 26 / 76

14 S1 Wheel and Tiller Pilots Commissioning Guide
Note:
The S1 TillerPilot provides fast heading (HDM) output at 5 Hz 0.1º resolution.
1.9 Optional components
Note:
For installation, refer to the guide supplied with the component.
GyroPlus yaw sensor
S1 WheelPilots do not contain a builtin Gyro, but you have the option of adding:
• a dealerfitted internal GyroPlus (part number: A18069)
An internal gyro is fitted as standard to the S1 TillerPilot
Handheld remotes
Two wireless Raymarine handheld remote control systems are available:
• the Smart Controller system can act as the sole pilot controller in your system
or as a fullfunction remote for systems with other fixed pilot controllers.
• the compact S100 Controller system gives you full course control away from
the main steering position
External alarm
The SmartPilot sounds all critical alarms from all controllers. On large or noisy
boats you can fit a Raymarine external alarm (part number: Z035, connected
through E85001 interface box) as a high volume audible repeater.
Wind vane
The SmartPilot computer can use wind angle information from a wind vane or
instrument to maintain a course relative to the wind. You can provide wind angle
information to the autopilot system by connecting it to a suitable SeaTalk or
NMEA instrument (providing wind angle and speed information).
HDG
HDM
HDT heading
VTG
course over ground* (COG),
speed over ground* (SOG)
*
The computer will only transmit these items if it has received the appropriate data.
SmartPilot computer NMEA outputs*
NMEA 0183 sent Information sent
81282_1.book Page 14 Monday, October 2, 2006 1:58 PM