![background image](http://html1.mh-extra.com/html/raymarine/quantum-radome/quantum-radome_installation-instructions-manual_3969001039.webp)
10. Open a Radar application page.
11. Check that the reported Radar on the power /
transmit pop-up is the Radar that you have just
paired with.
12. If the correct Radar is reported, select
Tx
(Transmit).
13. If the reported Radar is not the Radar scanner
you just paired with, select the correct Radar
from the menu:
Menu > Select Radar:
and then
select
Tx
from the pop-up.
The Radar image can be displayed on all networked
MFDs.
MFD access point connection when
connected to Quantum Wi-Fi
Depending on you MFD variant, you may be
restricted from connecting your MFD to a Wi-Fi
access point, if a Quantum Radar that is connected
using Wi-Fi is currently transmitting on the system.
a
,
c
,
e
and
gS Series
MFDs CANNOT connect
to a Wi-Fi access point if there is a transmitting
Wi-Fi connected Quantum Radar in the system. To
connect these MFDs to a Wi-Fi access point the
Quantum Radar must be placed in Standby mode
first.
eS Series
MFDs CAN connect to a Wi-Fi access
point at the same time as being connected to a
transmitting Wi-Fi connected Quantum Radar.
Standby and sleep modes for Wi-Fi
connections
The radar scanner has 2 modes which may initially
prevent you from successfully pairing the radar to an
MFD via Wi-Fi, in the event that the Wi-Fi connection
between the 2 devices is lost. These modes are part
of the scanner’s normal operation, but it’s important
to understand how these modes can potentially
impact the pairing process.
•
Sleep mode
— If the connection to the MFD is lost
while the scanner is in
Standby
mode, the scanner
will switch to Sleep mode within 30 minutes. When
the connection to the MFD is restored, return
the scanner to Standby mode using the
Power
up Radar
option on the MFD’s Shortcut screen,
accessible by momentarily pressing the MFD’s
Power button.
•
Standby mode
— If the connection to the MFD
is lost while the scanner is in
Transmit
mode,
the scanner will switch to Standby mode within
5 seconds. When the connection to the MFD is
restored, return the scanner to Transmit mode
using the
Radar: Tx
option on the MFD’s Shortcut
screen.
For a full description of all the Radar modes and
associated on-screen status symbols, refer to the
Radar scanner status symbols
topic in the
Radar
application
chapter of your MFD’s Operations
handbook.
Retain your Wi-Fi passcode
To connect to the Radar using Wi-Fi (wireless), you
will need to know the unit’s
SSID
, and
Passcode
.
Both the SSID and Passcode are provided on the
serial number label on the underside of the unit,
and on spare serial number labels supplied in the
box. You may wish to make a separate note of
this information and keep in a secure location. You
should also keep the Radar scanner packaging in a
safe place for future reference.
Operation instructions
For detailed operation instructions for your product,
refer to the documentation that accompanies your
display.
System checks and troubleshooting
45
Содержание Quantum Radome
Страница 1: ...INSTALLATION INSTRUCTIONS Quantum Radar...