5.2 Power cable routing (Wi-Fi
variant only)
There are 2 typical power cable routing scenarios,
depending on how your Radar is secured to the
vessel.
1.
Platform mount.
2.
Pole mount.
The recommended power cable routing for these 2
scenarios is illustrated in the following section.
Platform mount
Route the power cable through the provided channel.
Pole mount
Route the power cable to the side of the unit to allow
for the pole mount.
5.3 Power connection
Note:
A Y-adapter cable (part number A80308) is
available for existing installations that already use
a combined power/data cable from a Digital or HD
Color Radome. The Y-adapter splits the existing
combined cable into the separate data and power
connectors used by the scanner.
Item
Description
Connects to:
1
Power cable.
Product’s power
connector.
2
Red cable (positive)
Power supply’s positive
terminal.
3
Connection to 12V /
24V power supply.
Power supply.
4
Black cable (negative)
Power supply’s negative
terminal.
In-line fuse and thermal breaker
ratings
The following in-line fuse and thermal breaker ratings
apply to your product:
In-line fuse rating
Thermal breaker rating
5A
3 A (if only connecting one
device)
Note:
• The suitable fuse rating for the thermal breaker
is dependent on the number of devices you are
connecting. If in doubt consult an authorized
Raymarine dealer.
• Your product’s power cable may have a fitted
in-line fuse, if not then you must add an in-line
fuse / breaker to the positive wire of your
products power connection.
Warning: Grounding not
required
This product is fully insulated and does
NOT require separate grounding.
Power cable extension
The product is supplied with a power cable, which
can be extended if required.
• The power cable for each unit in your system
should be run as a separate, single length of
2-wire cable from the unit to the vessel's battery or
distribution panel.
Cables and connections (Quantum variant with Wi-Fi
only)
35
Содержание Quantum Radome
Страница 1: ...INSTALLATION INSTRUCTIONS Quantum Radar...