![background image](http://html1.mh-extra.com/html/raymarine/quantum-radome/quantum-radome_installation-instructions-manual_3969001027.webp)
4.5 Network connection
The scanner must be connected to a compatible
Raymarine multifunction display (MFD), either via
Wi-Fi, or via a physical RayNet cable connection.
Once connected, the multifunction display can show
Radar echo data.
Wired (RayNet) multifunction display connection
Scanner connected to a multifunction display using a
RayNet cable.
Item
Description
1
Quantum
™
Radome (for clarity, only the
connections area of the underside of the unit is
shown here).
2
Connector panel of compatible Raymarine
multifunction display (for clarity, only the
connections area of the unit is shown here).
3
RayNet data cable.
Wi-Fi multifunction display connection
Scanner connected to a multifunction display using
Wi-Fi.
Item
Description
1
Compatible Raymarine multifunction display with
Wi-Fi capability.
2
Quantum
™
Radome.
3
Wi-Fi datalink.
Refer to the
Chapter 7
System checks and
troubleshooting
section, and to your MFD
documentation for further information about setting
up the Wi-Fi connection between your MFD and the
Quantum
™
scanner.
Multiple multifunction display configuration
A Raymarine network switch can be used to connect
the unit to more than 1 multifunction display.
Item
Description
1
Quantum
™
radome (for clarity, only the
connections area of the underside of the unit is
shown here).
2
RayNet cable.
3
RayNet network switch.
4
Connector panel of compatible Raymarine
multifunction display (for clarity, only the
connections area of the unit is shown here).
5
Connector panel of additional compatible
Raymarine multifunction display (for clarity, only
the connections area of the unit is shown here).
For details on available network hardware and
cables refer to
Chapter 11
Spares and accessories
.
32
Содержание Quantum Radome
Страница 1: ...INSTALLATION INSTRUCTIONS Quantum Radar...