Raymarine hsb2 Series Скачать руководство пользователя

Страница: 96 / 231

Chapter 4: Integrated Radar Operations

4-3

Moti

The reference used for the Course Up depends on the information available.
The first available in the following list is used:

1. A locked heading over a SeaTalk connection

2. The heading at the time Course Up was selected

If 1. is in use and a new course (locked heading) is selected, the picture
automatically rotates to the new Course Up.
If 2. is in use, press the

HDG MODE

soft key then

COURSE UP

to manually reset

the Course Up to the new course.

Selecting the Heading and Motion Mode

Press the

HDG MODE

default soft key to obtain the following display, when

heading information is available:

The currently selected mode is shown highlighted, and is also indicated in the
status bar at the top of the screen.

➤

To change the heading and motion mode:

1. Press the

HDG MODE

default soft key.

2. Press the soft key corresponding to the mode you require. The radar picture

changes to the selected mode.

3. Press

ENTER

to clear the heading mode soft keys. The current orientation

is indicated in the status bar.

Note:

True Motion is only available in Course Up and North up mode.

If you re-select Course Up when this is already the current mode, the Course
Up reference is reassessed according to the current data.

Effect on VRM/EBLs

VRM/EBLs do not move on the screen, unless you change the range, offset the
centre, or change the heading mode.

•

In Head Up mode, the VRM/EBLs are fixed with respect to the ship’s
heading marker.

•

In North Up mode, the VRM/EBLs are fixed with respect to North.

•

In Course Up mode, the VRM/EBLs are fixed with respect to the selected
course.

HDG MODE

COURSE UP

NORTH UP

D3641-3

HEAD UP

TRUE REL

Содержание hsb2 Series








































































































































































































































Результаты поиска

Содержание hsb2 Series

Отзывы:

Похожие инструкции для hsb2 Series

Бренды по названию

Популярные бренды

Raymarine hsb2 Series, Руководство пользователя

Результаты поиска

Содержание hsb2 Series

Отзывы:

Похожие инструкции для hsb2 Series

Бренды по названию

Популярные бренды