Raymarine hsb2 Series, Руководство пользователя

Страница: 118 / 231

Chapter 5: Standard Chart Operations 5-19
D
is
pl
ay
ing
R
out
e
Inf
orma
tion
• Details of waypoints in the route, using the soft keys. You can use this
information to review your passage plan.
Route Leg and Waypoint Information
➤
To display information about a route leg, move the cursor over the leg until the
letters
RTE
are displayed. A Route Leg data box such as the following is
displayed.
To remove the data box, move the cursor away from the route or press
CLEAR
.
➤
To display information about a route waypoint, move the cursor over the
waypoint until the letters
WPT
are displayed. The waypoint data box is
displayed, this box includes the route and waypoint number.
To remove the data box, move the cursor away from the route or press
CLEAR
.
Using Route Information to Review Your Passage Plan
You can view data for all the waypoints in the current route, or any saved route.
You select the route from the database list and the information is displayed in a
Route Information pop-up; the following details are provided for each
waypoint:
Position
Bearing (from previous waypoint)
Length of leg (from previous waypoint)
Total Length
Time (ETA or Elapsed)
Soft keys are provided to toggle the time between ETA or elapsed and to
change the Speed Over Ground (SOG) value; the ETA for each waypoint is
calculated using the selected SOG, so you can change the SOG to determine
its effect on your ETA.
The chart scenario Review Your Passage Plan on page 2-30 provides a simple
example of how to use the route information.
➤
To display information about any route in the database:
1. Press the
ROUTE
soft key, followed by
MORE
, then press
ROUTE LIST
. The
route list is displayed. The selection bar indicates the selected route.
2. Use the trackpad to select the required route, then press the
ROUTE INFO
soft
key.
RTE
D4259-2
LEG 02 - 03
0°T 5.5nm
ROUTE NO.
ROUTE NAME
WPT
ROUTE
ROUTE
INFO