Raymarine hsb2 PLUS, Руководство пользователя

Страница: 69 / 228

Chapter 3: Getting Started & Adjusting the Display 3-5
Si
mu
la
tor Mod
e
➤
To switch the display unit off, press and hold the
POWER
key for three
seconds. A countdown timer is displayed as shown below:
Figure 3-4: Switch Off
When the counter reaches zero a beep sounds, and the display unit switches
off. Release the
POWER
key.
Note: Switch the display unit off before you remove either the power or trans-
ducer cords.
Simulator Mode
When simulator mode is on a simulator database box is displayed.
When the display is switched off then on again, simulator mode is maintained.
It is recommended that you select the System Set Up Menu and switch off
simulator mode when you have finished.
➤
To view simulated image:
1. Press MENU followed by either:
the
SYSTEM SET UP
soft key for simulated data or
the
SONAR SET UP
soft key for a simulated fishfinder image.
The set up menu pop-up is displayed.
2. Use the trackpad to move the selection bar over the option
SIMULATOR
/
SONAR SIMULATOR
. The simulator soft keys are displayed.
3. In the system set up menu, press
DATA
to view the chart display with simu-
lated position.
In the sonar set up menu, press the
ON
soft key to switch on the sonar simu-
lator.
4. Press
ENTER
twice to return to the default display.
Note: Any waypoints placed on the chartplotter in simulator mode are re-
tained in the database list and are available for use in routes.
DISPLAY GAIN
VRM/EBL
MULTI
MARKS
ALARMS RANGE
ENTER CLEAR MENU POWER
Countdown timer:
number of seconds
to power off
SECONDS
3
D3599-2
POWER OFF IN
3s
MENU
SYSTEM
SET UP¬
SONAR
SET UP¬