Raymarine G-Series system, Инструкции по установке и пусконаладке

Страница: 82 / 128

G-Series Installation & Commissioning 82
8.1 Language setting
The system will operate in the following languages:
To select a language:
Select the required language from those displayed.
8.2 Compass heading setup
The G-Series system provides options to set up a Raymarine
compass.
Note: If the compass is connected to a Raymarine autopilot, you
should calibrate the compass heading using the autopilot
controller, and proceed to the Radar setup (
page 83 ).
Check heading
Provided that the system has a compass connected, the compass
heading is displayed in the data bar at the top of the screen:
If no heading is displayed this could indicate a problem with the
autopilot or compass connection. See
Chapter 9:
Troubleshooting. Page 91 for more information.
Linearize (swing) the compass
If your system has a Raymarine compass (e.g ST80 or Fasthead-
ing sensor) which is not connected to an autopilot system, then you
will need to linearize (swing) the compass using the G-Series
system.
To linearize your compass:
1. Once you have selected LINEARIZE COMPASS, follow the on-
screen instructions.
2. When instructed to align heading, press the ALIGN HEADING
soft key and then turn the rotary control one click at a time to
fine tune the heading.
English (US) English (UK) Chinese
Danish Dutch Finnish
French German Greek
Icelandic Italian Japanese
Korean Norwegian Portuguese
Russian Spanish Swedish
D10340-1
MENU
SYSTEM SETUP
LANGUAGE
D10351-1
Compass Heading
D10349-1
MENU
COMPASS SETUP
LINEARIZE COMPASS