Raymarine G-Series system, Инструкции по установке и пусконаладке

Страница: 37 / 128

37 Chapter 4: Cables and connections
4.3 GPM400 processor
The GPM400 has the following connections:
1. 12/24V Power in (see page 33 )
2. Status LED (see page 99 )
3. SeaTalk / Alarm output (see page 50 )
4. SeaTalk
ng
connection (see page 54 )
5. DVI display connection - repeater (see page 38 )
6. DVI display connection - master (see page 38 )
7. USB connection (for chart and software upgrade only)
8. SeaTalk
hs
network connection (see page 47 ).
9. NMEA 0183 connection (see page 51 )
10. NMEA 0183 connection (see page 51 )
11. Audio output (see page 46 )
Maximum quantity of GPM400 units
The G-Series system will support up to 4 GPM400 processors, of
which 1 must be set as the Master GPM.
Master GPM
On a system with more than one GPM400 you must designate one
them as a Master GPM. The SeaTalk and SeaTalk
ng
bus must be
connected to the Master GPM.
Note: The data is passed between multiple GPMs using the
SeaTalk
hs
network.
See also
• Ensure you record connections to the GPM400 on the schemat-
ic diagram. See
Appendix B - Nav Station schematic .
• For a typical SeaTalk
hs
system see page 19 .
• For information on SeaTalk
hs
cables and connections see
page 47 .
D10163-1
S
EA
TA
LK HIGH SPE
ED
NM
EA 0183
2
S
E
A
TA
LK/ALARM
O
U
T
POWER
NM
EA 0183
1
SE
ATALK N
G
AUDIO
MONITOR REPEATER
MONITOR MASTER
4 3 5 1
6 7 8 9 10 11
2