Raymarine eci-100, Руководство по установке

Страница: 29 / 58

4.7 Honda engine connections
The ECI–100 can connect to compatible Honda
engine systems.
A
DeviceNet NMEA 2000 cable and T-Piece
connector are required. The T-Piece connector must
be connected inline with the existing
NMEA 2000 bus
and the cable should be connected to the T-Piece
and the
DeviceNet connector on the ECI-100.
12 V dc
D13394-1
1
3
5
SeaT alk
ng
NMEA 2000
2
4
1. SeaTalk ng® backbone power supply (12 V dc)
2. DeviceNet NMEA 2000 cable
3. ECI-100 unit
4. DeviceNet NMEA 2000 T-Piece connector
5. NMEA 2000 engine system bus
Note: DeviceNet cables and accessories are
available from your local Marine electronics Dealer
/ Retailer.
Compatible Honda systems
Note: Please ensure you have compatible engine
pre-installed with a NMEA 2000 system fitted to
your vessel before installing your ECI-100 . Check
with your local engine dealer if you are unsure.
Engine data only
BF50D BF140D
BF60D BF150A
BF80 BF200AKI
BF100 BF225A
BF115D BFP60A
BF135A
Honda engine data
With the ECI-100 connected to a compatible Honda
engine system the following engine data can be
displayed on a LightHouse
TM MFD.
Engine Data
Engine Speed (RPM)
Engine Fuel Flow Rate
Engine Hours Engine Boost Pressure
Engine Oil Temperature Battery Voltage
Engine Coolant Temperature Transmission Oil Pressure
Engine Oil Pressure Transmission Oil
Temperature
Engine Coolant Pressure Fuel Level
Engine Alarms
Over Temperature Low Coolant Level
Low Oil Pressure
Water In Fuel
Low Oil Level
Cables and connections 29