Raymarine eci-100, Руководство по установке

Страница: 18 / 58

12 V dc
SeaTalk
ng
SeaTalk
ng
D12970-1
5
3
2
2
1
4
3
4
Note: The illustration above shows the various
products that can be connected in a typical system.
For information on how to connect the products,
refer to the
Chapter 4 Cables and connections
section. For information on available cables and
accessories, refer to the
Chapter 10 Spares and
accessories section.
Item Description
1 Multifunction display
2 Vessel engines (Connection to engine’s CAN bus)
3 Engine specific adaptor cables
4 ECI units
5
SeaTalk ng 5–way block
Example: expanded system
In the example below the unit is used as both
engine interface and steering control interface
simultaneously.
STBY
00
12 V dc
SeaTalk
ng
SeaTalk
ng
D12971-2
3
2
1
4
8 7
6
5
5
9
Note: The illustration above shows the various
products that can be connected in a typical system.
For information on how to connect the products,
refer to the
Chapter 4 Cables and connections
section. For information on available cables and
accessories, refer to the
Chapter 10 Spares and
accessories section.
Item Description
1
Multifunction display
2 Vessel engine(s) and steering (Connection to
engine CAN bus)
3 Engine-specific adaptor cable
4 ECI unit
5 SeaTalk ng 5–way block
6 EV2 — Evolution TM autopilot
7
SeaTalk ng Pilot control head
8 SeaTalk ng instrument display
9 SeaTalk ng spur cable connection between the
SeaTalk ng bus and the EV2’s SeaTalk ng connector.
Typical system — legacy MFDs
Example: basic system — engine interface only
12 V dc
SeaTalk
ng
D13056-1
5
3
2
4
1
1. Legacy MFD (e.g. E-Series Widescreen).
2. Vessel engine(s), connected to engine CAN bus
(e.g. J1939).
3. Engine-specific adaptor cable.
4. ECI unit.
5. SeaTalk ng 5-way block.
18 ECI–100