Raymarine CYCLONE, Руководство по установке

Страница: 75 / 92

13.4 Radar target acquisition data source requirements
Radar target acquisition requires the following data sources to be available on your system (e.g.
connected to your multifunction display, via SeaTalkng ® or NMEA 0183).
Data type Example data source
COG (Course Over Ground) GPS or GNSS receiver (MFD internal receiver or
external receiver).
SOG (Speed Over Ground) GPS or GNSS receiver (MFD internal receiver or
external receiver).
HDG / HDT (True Heading) Compass or Autopilot sensor providing
Fastheading data (e.g. Evolution EV-1 / EV-2).
13.5 Doppler data source requirements
Use of the Doppler Radar features requires the following data sources to be available on your system
(e.g. connected to your multifunction display, via SeaTalkng ® or NMEA 0183).
Required data sources
Data type Example data source
COG (Course Over Ground) GPS or GNSS receiver (MFD internal receiver or
external receiver).
SOG (Speed Over Ground) GPS or GNSS receiver (MFD internal receiver or
external receiver).
Recommended data source
Data type Example data source
HDG / HDT (True Heading)
Compass or Autopilot sensor providing
Fastheading data (e.g. Evolution EV-1 / EV-2).
Note:
A Heading data source is not essential for Doppler operation. However it will improve the
performance of Doppler mode at slower speeds (< 15 knots), when tide set and leeway are present.
Troubleshooting
75