Raydec MT5 Скачать руководство пользователя страница 74

Страница: 74 / 88

MT5 Multi-Tracer Operating Manual

page 74

The learn operation has a fundamental effect on the operation of the unit and should not

be used unless necessary. Indiscriminate use of the learn operation could disrupt data

collection and user settings.

Once all loads are connected, powered and operating (power on for at least 2 minutes

and status LED blinking

) the system can be “learned.”

As described above and in section 4.6

“Direct Hardware Interface”, connect a keyboard

and video monitor.

Press “enter” to display the menu. Select the menu item for “Learn

System”

You will then be prompted to confirm your intention to “learn” the system. After

confirmation the system will scan all the load ports for connected loads and query these

loads for their configurations. This operation takes a few moments. Once completed, the

system configuration is shown as described in the next section.

Look closely at the information displayed to make sure it agrees with the expected

number of loads and module channels on each load. The learn mode immediately

implements the learned configuration. If there is an error, there are no undo, save, or

not-save options.. The hardware problem must be resolved (for example, connecting

the load control cable) and the learn operation repeated.

10.3. Show System Configuration

The system configuration may be shown on the local interface (video monitor) as a

result of using the “learn” mode or by user selection. In either case, the current system

configuration is shown one page at a time. Press enter to advance to the next page.

The pages display basic information about the MT5 control and load units. This

information is similar to the information displayed in the “About” menu item available on

the web interface.

Содержание MT5

























































































Результаты поиска

Содержание MT5

Отзывы:

Похожие инструкции для MT5

Бренды по названию

Популярные бренды

Raydec MT5, Руководство по эксплуатации

Результаты поиска

Содержание MT5

Отзывы:

Похожие инструкции для MT5

Бренды по названию

Популярные бренды