Raycus RFL-QCW300, Руководство пользователя

Страница: 31 / 50

Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide RFL-QCW300/3000
27
Table 9 ( continued )
Code Description Examples
STA
(cont.)
Read device status status—The status is reported as a bit-encoded
32-bit word. Undefined bits or bits defined as ―Reserved‖ can be in
any state and should be ignored. Each of the bits have the following
meaning
Bit 13
- 0 = Compatibility Disable
- 1 = Compatibility Enable
Bit 14 - Reserved
Bit 15 - Reserved
Bit 16
- 0 = Gate Mode Disable
- 1 = Gate Mode Enable
Bit17
- 0 = Normal operation
- 1 = High Pulse Energy
Bit 18
- 0 = Hardware Emission Control Disable
- 1 = Hardware Emission Control Disable
Bit 19
- 0 = Normal operation
- 1 = Power Supply Failure
Bit 20 - Reserved
Bit 21 - Reserved
Bit 22 - Reserved
Bit 23
- 0 = Normal operation
- 1 = Duty Cycle Too High
Bit 24
- 0 = Normal operation
- 1 = Low Temperature
Bit 25
- Reserved
Bit 26
- 0 = Normal operation
- 1 = GND Leakage
Bit 27
- 0 = Hardware Aiming Beam Control
Disable
- 1 = Hardware Aiming Beam Control
Enable
Bit 28
- 0 = Normal operation
- 1 = Aiming Beam Alarm
Bit 29
- 0 = Normal operation
- 1 = Critical Error
Bit 30
- 0 = Fiber Interlock OK
- 1 = Fiber Interlock Active
Bit 31
- 0 = Normal operation
- 1 = High Average Power
Sent: ―STA‖
Response: ―STA: 4100"
This translates to the
following: 4100 = 0x1004,
so bits 2 and 12 are set. This
means that emission is on
and modulation is enabled.
受 控
武汉锐科