16
OPERATIONS
ENGINE STARTING AND
STOPPING PROCEDURES
STARTING COLD ENGINE
Move the stop switch to “START”
position.
1.
Give a gentle push on the primer pump
repeatedly (7-10times) until fuel comes
into the primer pump.
2.
Cold Starts: Pull lever up to close choke.
3.
Pull starter handle until engine flash. fires.
4.
Push choke lever inwards (excessive cranking with choke lever will cause
flooding engine making it difficult to start).
5.
Pull starter handle until engine starts.
6.
Allow engine to warm up for a few minutes before using.
STARTING WARM ENGINE
If fuel tank was not run dry, pull starter. one to three times and should start.
DO NOT USE CHOKE
If fuel tank was run dry, after refilling repeat steps 3 thru 7 in. STARTING
COLD ENGINE.
STOPPING THE ENGINE
Move switch to STOP position
