9
DESCRIPTION
SAFETY MANUAL included with unit. Read before operating and keep for future
reference to learn proper, safe operating techniques.
1.
NYLON CUTTER HEAD Contains replaceable nylon trimming line that
advances when the trimmer head is tapped against the ground while the head is
turning at normal operating speed.
2.
CUT-OFF KNIFE Trims nylon filament to the correct length-7״, head to end of
line-when nylon trimming head is bumped on the ground during operation, line
advance. If trimmer is operated without a cut-off knife the line becomes too long
(more than7”) the engine, this will overheat or damage the engine.
3.
DEBRIS SHIELD Mounted just above the cutting attachment. Helps protest
operator by deflecting debris produced during debris produced during the
trimming operation. Do not operate unit without shield.
4.
D-HANDLE this handle can be adjust-ed at you convenience for comfort.
5.
DRIVE SHAFT ASSEMBLY Contains a specially designed liner flexible drive
shaft.
6.
IGNITION SWITCH “slide switch” mounted on top of the Throttle Trigger
Housing. Move switch FORWARD to Run, BACK TO STOP.
7.
SAFETY LEVER Before acceleration, compress it please.
8.
THROTTLE TRIGGER Spring loaded to return to idle when released. When
accelerating, press trigger gradually for best operating technique. Do not hold
trigger while starting.
9.
PURGE BULB Pushing purge bulb (7 to 10 times before starting),will remove
all air and sale fuel from fuel system and bring fresh fuel to the carburetor.
10.
FUEL TANK LID.
11.
FUEL TANK Contains fuel and fuel filter.
12.
AIR CLEANER COVER Contains replaceable felt element.
13.
CHOKE the choke control is located on the top of the filter cover.
14.
STARTER HSNDLE pull handle until engine starts, then return handle slowly.
DO NOT let handle snap back or damage to starter will occur.
