7
at least 15 METER(50 FEET)
● Never leave the machine unattended.
● Do not use this unit for any job other than those for which it is intended as described in
this manual.
● Do not overreach. Keep proper footing and balance at all times. Do not run the unit
while standing on a ladder or on any other unstable footing location.
● Keep hands and feet clear of the nylon cutting head while unit is in use.
● Do not use this type of machine for sweeping away debris.
● Do not use the unit when you are tired, ill or under the influence of medication ,drugs
or alcohol.
● Use nylon cutting head which is free of damage. If a stone or any other obstacle is hit,
stop the engine and check the nylon cutting head. A broken or unbalanced nylon cutting
head must never be used.
FOLLOW INSTRUCTION FOR CHANGING ACCESSORIES.
● Do not store in a closed area where fuel vapors can reach an open flame from hot
water heaters, furnaces, etc. Store in a locked, well ventilated area only.
● Ensure safe and proper performance of your product. These part are available from
your dealer. The use of any other accessories or attachments may cause a potential
hazard or injury to the user, damage to the machine and void this warranty.
● Clean the machine completely, especially, the fuel tank, its surroundings, and the air
cleaner.
● When refueling, be sure to stop the engine and confirm that it is cooled down.. Never
refuel when the engine is running or hot. When gasoline spills, be sure to wipe it up
completely dispose of those materials before starting the engine.
● Stay clear of other workers or bystanders by at least 15 meters/50 feet.
● When ever approaching an operator of the machine, carefully call his attention and
confirm that the operator stop the engine. Be careful not to startle or distract the operator
which can cause an unsafe situation.
● Never touch the nylon cutting head when ever the engine is running. If it is necessary
to adjust the protector or nylon cutting head, be sure to stop the engine and confirm that
the nylon cutting head has stopped running.
● The engine should be turned off when the machine is moved between work areas.
● Be careful not to hit the nylon cutting head against stones, or the ground.
Unreasonable rough operation will shorten the life of the machine as well as create an
unsafe environment for yourself and those around you.
● Pay attention to loosening and overheating of parts. If there is any abnormality of
the machine, stop operation immediately and check the machine carefully. If
necessary, have the machine serviced by a authorized dealer. Never continue to
operate a machine which may be malfunctioning.
● In start-up or during operation of the engine, never touch hot parts such as the
muffler, the high voltage wire or the spark plug.
● After the engine has stopped, the muffler is still hot. Never place the machine in
any places where there are flammable materials (dry grass, etc.), combustible gasses
or combustible liquids.
● Pay special attention to operation in the rain or just after the rain as the ground may
be slippery.
● If you slip or fall to the ground or into a hole, release the throttle lever immediately.
● Be careful not to drop the machine or hit it against obstacles.
