King Kong of Skull Island
™
21 |
P a g e
8.
After pressing Test again, the wizard will instruct you to perform the same steps however this time
with the player 2 headset. Hold the player 2 headset in player head position and press test, wait 20
seconds and press test again. Perform steps 5-7 with Player 2 headset.
9.
Move the headsets around, to fill the bars (as seen on screen, see below). During this time, the
headset calibration process captures and maps the environment using the headset cameras. The
more the surrounded environment is recorded by the headset the more consistent the calibration
will be. The bars fill up based on both time elapsed since calibration started and the size of the
calibration file which grows depending on how much of the environment was captured. (see below)
10.
Once the bars are filled, sit in the players position, and test the calibration. The headset should
display a jeep and the position of the cameras for both player 1 and player 2 will show the driver
side. When done, press service to exit the wizard. (see below)
