King Kong of Skull Island
™
10 |
P a g e
Cabinet Assembly
CAUTION
UNDER NO CIRCUMSTANCES SHOULD THIS GAME BE OPERATED UNLESS ALL INSTALLATION PROCEDURES
HAVE BEEN COMPLETED AND ALL SAFETY FEATURES HAVE BEEN POSITIVELY TESTED AND ARE FULLY
FUNCTIONAL!
Upper Monitor Installation
The upper monitor assembly weighs approximately 95 lbs. and the installation requires a minimum of three
people, using two 6-foot step ladders (minimum height).
It is recommended that the main cabinet be moved
to or very near its desired operational location before beginning any of the setup tasks (see pg. 47 for
footprint measurements)
. It is also strongly recommended that the game NOT be moved with the monitor
installed in the operational (upright) position.
1.
Rotate the monitor bracket up into the operational (upright) position (
fig. a
below) and install the
four 1/4-20 x 1" screws to secure the bracket to the top of the main cabinet (
fig. b
below).
fig. a
fig. b
2.
Place two ladders next to the cabinet and remove the monitor assembly from the packaging.
3.
With the main cabinet standing alone and both headset arms in the down position, walk the monitor
assembly up the ladders and hook onto top of the monitor bracket.
