Pagina 22 di 33
RAVENNA s n c - OFFICINE METALMECCANICHE RIMORCHIO PER TRATTORE
Before leaving the tractor with the trailer, remove the ignition key to enter both brakes
(tractor and trailer). If the trailer must be parked by only disengages from the tractor
repeating in reverse the coupling operations, taking care to position the front support wheel
at a height such as to keep the trailer horizontal. Enter the parking brake by rotating the
adjusting lever.
In both cases avoid parking on a slope, in front of doors, emergency exits, fire-fighting
devices or in any case in order to create obstacle.
4.8 PERIOD OF INACTIVITY - STORAGE
For long-term storage (over 60 days), after washing, do the following:
•
Clean up the trailer from dirt, mud and grease;
•
Carry out any repairs;
•
Grease the cables brake control, moving parts and grease on the trailer the U support.
•
Park the trailer in a dry place and protected from the weather and possibly cover it with
a cloth.
•
In moist and salty sprinkle with a thin layer of oil the metal parts
CHAPTER 5
CHECKS, INSPECTIONS SAFETY, MAINTENANCE AND REPAIR
Below are given instructions for proper maintenance of the trailer: they are approximate
and may vary depending on the climatic conditions of the working environment.
Any changes are left to the common sense and experience of the operator. However, it
remains critical that careful maintenance is one of the most important factors for the proper
functioning of the trailer: ignore this factor, it can be a source of danger to persons and
damage to property and for the first trailer.
The instructions provided in this manual concerning the controls and normal maintenance.
Extraordinary maintenance, repairs and special records must be performed by qualified
personnel.
Before beginning the inspection, maintenance, adjustment or repair, lock the trailer
perfectly level: in case you need to perform operations in container upside down, to
operate safely lock the body in the tilted position, using the appropriate device.
