Pagina 15 di 33
RAVENNA s n c - OFFICINE METALMECCANICHE RIMORCHIO PER TRATTORE
2.
2 WORKING CAPACITY
The trailer can carry load of different type and nature compatibility with the dimension of
side and flat bed in function of barycentre of machine: The bulk don’t exceed the values
indicate in the plate fixed on trailer and in the top of this manual. Is necessary to respect
the values or risk overturning the machine.
The machine is provided with its box with specific dimension and carrying
capacity: In this situation is calculated the maximum carrying capacity
reported in table and predisposed the relative safety system.
If the trailer is equipped with another configuration, who set up the equipment
must ensure the working safety operation of machine. Officina
Metalmeccaniche Ravenna decline each responsibility at about!
2.3 USE RESTRICTIONS
The machine can not be used with other terms provided in the paragraph 2.1
Is strictly forbidden remove, camper and modify in any way the safety system
present in the machine.
2.4 SOLUTIONS ADOPTED TO PREVENT RISK
2.4.1 DESCRIPTION OF SAFETY DEVICES
The trailer is equipped with the following safety devices:
•
Mechanical service brake;
•
Parking brake;
•
Device height adjustment wheel parking;
•
Lock box with pins and cotter safety to prevent accidental overturning:
•
Side with safety cotter;
•
Limit wire to prevent the exceed tipping max limit;
•
Safety catch (to prevent the accidental fall of box during repairing or maintenance
operation);
•
Latches and locking tensioning ropes load;
•
Electrical system performed according to the existing norms;
•
Plates showing max flow attached to the frame;
•
Plates with main operational instructions, attached to the frame;
•
Signs warning of danger in areas of residual risk;
