Pagina 20 di 33
RAVENNA s n c - OFFICINE METALMECCANICHE RIMORCHIO PER TRATTORE
In any case, always make sure that the mass of the load is less than the rated capacity
stated by the manufacturer and indicated on the label attached on the machine.
WARNING!
If the trailer is not used carefully following the instructions given in this
manual, the company RAVENNA Mechanical Workshops snc declines from
now all responsibility for any damage to people, animals and / or property
damage caused by improper use.
WARNING!
For loading and unloading, if necessary, use personal protective equipment:
gloves, safety glasses, work boots.
4.5 IN GEAR
After disconnecting the parking brake, the operator driver can move the tractor with the
trailer hooked.
While driving he must move with extreme caution to avoid risk to themselves and to other
persons present within the operating range of the vehicle due to possible movements of the
load. The maneuverability of the tractor is in fact heavily influenced by the presence of the
trailer, especially if the load is full and you have to move in confined spaces and / or slope.
If necessary, in the slopes and in reverse, use the service brake of the trailer.
4.6 UNLOADING THE TRAILER
After stopping the vehicle and entered the parking brake, for unloading, we can distinguish
two cases:
•
Bulky items that need to be downloaded using forklifts, cranes or other similar means.
After releasing the load from ropes or chains anchoring the lower body any one or more
banks engage the load with appropriate means and proceed.
