Pagina 17 di 33
RAVENNA s n c - OFFICINE METALMECCANICHE RIMORCHIO PER TRATTORE
chains of adequate size. The ropes (or chains) must be securely fastened to the trailer and
well stretched toward the anchor point on the ground.
Once the transport, before releasing the trailer from all constraints, verifies that the status
and location of the same are such there is no danger.
Then proceed to the discharge using methods similar to those used for the load.
CHAPTER 4
USING THE TRAILER
4. 1 GENERALITY
The tractor operator must be trained in the conduct of the tractor and trailer coupled:
during working hours he is responsible for the vehicle and as such have to worry about
prohibit its use by unauthorized persons.
Before starting the machine complete, the operator must make sure it is in perfect working
order.
Any problems should be reported immediately to security managers.
The terms "forward, backward, left and right" reported in the following, refer
to an operator sitting in the driving seat.
4.2 GETTING STARTED
Before attaching the trailer to the tractor:
•
Check the integrity of the side and the correct positioning of themselves and their
attachment systems.
•
Check the correct insertion of the four locking pins in the union U of the body to the
frame.
•
Check for oil leaks through gaskets, fittings and pipes of the hydraulic circuit control
tipping body
•
Check the integrity of the flexible cable and brake levers
•
Check the integrity of the rear lights
•
Check for proper tire pressure.
