Raven Sidekick Pro, Инструкция по установке и эксплуатации

Страница: 77 / 98

CNH Pro 700 Set-Up: Alarms Set-Up 75
CNH PRO 700 SET-UP
TABLE 2.
Alarms Set-Up
Setting Description Additional Information
Rate Controller
Use the Rate Controller
window to select a rate
controller for setup.
Set the alarms for the main tank. If the
sprayer is equipped with a direct injection
system, enter the alarm settings for each
direct injection tank.
Press the Rate Controller window to access
the pop-up window available options:
• M.Tank - The main tank
• Inj#1 - The first direct injection tank
• Inj#2 - The second direct injection tank
• Inj#3 - The third direct injection tank
• Inj#4 - The fourth direct injection tank
Press the name of the rate controller that
needs to be configured.
OFF Target Alarm
Use the OFF Target Alarm
window to set the allowable
difference between the
target application rate and
the actual application rate.
A pop-up message displays to alert the
operator when the actual application rate
exceeds or falls below the target rate
exceeds or falls below the target
application rate by the selected
percentage.
The display uses the percentage in the OFF
Target Alarm window for both over-
application and under-application.
Press the OFF Target Alarm window to
access the keypad.
Enter the desired percentage. The valid
range is 0 - 99%.
Press Enter to save the value and close the
keypad.
Dual Flow Alarm
Use the Dual Flow Alarm
window to set the flow
error tolerance for chemical
injection.
Note: The Dual Flow Alarm
window only displays when
a direct injection tank is
selected in the Rate
Controller window.
Press the Dual Flow Alarm window to
access the keypad.
Enter the desired value. The valid rate is 1 -
9 with 1 being the least sensitive and 9
being the most sensitive. The default value
is 6.
Press the Enter button to save the value
and close the keypad.