Raven SCS 460, Инструкция по установке и обслуживанию

Страница: 14 / 50

9
PART
SERIAL
No.
No.
CONSOLE FEATURES
IMPORTANT: This Console requires selection of US (Volume per acre), SI (Volume per hectare),
or TU {1,000 sq. ft.} area; SP1 (wheel drive, etc.) or SP2 (radar) speed sensor; and C-SD (Standard
Valve), C-F (Fast Valve), C-FC (Fast Close Valve), C-P (PWM Valve) or C-PC (PWM Close Valve).
Hold SELF TEST key to view selections.
Console Revision can be determined by the letter
stamped in REV box on label.
Console Program can be determined by the letter
stamped in PGM box on label.
FUNCTION KEYS -- Used to Display Data
TOTAL AREA -- Total Area Applied
TOTAL VOLUME -- Total Volume Applied
FIELD AREA -- Field Area Applied
FIELD VOLUME -- Volume Applied to Field
DISTANCE -- Distance Traveled
SPEED -- Speed of Vehicle
VOLUME/MIN -- Volume Per Minute
DATA MENU -- Printer Option
CALIBRATION KEYS-- Used to enter data into the
Console to calibrate the system.
BOOM CAL -- Length of Boom. Select Boom
number by using the
UP/DOWN arrow keys.
SPEED CAL -- Determined by Speed Sensor
METER CAL -- Meter Calibration Number
VALVE CAL -- Valve Response Time
RATE 1 CAL -- Target Application Rate
RATE 2 CAL -- Target Application Rate
TIME -- 24 Hour Clock (Military Time)
Selects manual or fully automatic control.
CE -Use like you do the CE key on a
calculator.
POWER-Selects POWER ON or OFF.
Displays actual rate of application,
calibration, and function data.
Manual override control provides
capability for spot application.
ENTER -Used only to enter data into the
Console.