Raven SCS 460, Инструкция по установке и обслуживанию

Страница: 35 / 50

30
CORRECTIVE ACTION
1) Check fuse on back of Console.
2) Check battery connections.
3) Check operation of POWER ON/OFF
switch.
4) Return Console to your Dealer to replace
Processor Board Assembly.
1) Return Console to your dealer to replace
Face Plate Sub-assembly.
1) Return Console to your Dealer to replace
Face Plate Sub-assembly.
1) Return Console to your Dealer to replace
Face Plate Sub-assembly and/or Processor
Board Assembly.
1) Check battery voltage and battery connec-
tions.
1) Check battery voltage and battery connec-
tions.
1) Check battery voltage and battery connec-
tions.
1) Return Console to Dealer to replace
Processor Board Assembly.
1) Return Console to Dealer to replace LCD
Display Board Assembly.
1) Check Speed Sensor cable connector and
plug on back of Console for loose pins.
2) Clean pins and sockets on Speed Sensor
cable connectors.
3) If no extension cable is used, replace
Speed Sensor Switch Assembly.
4) If Speed Sensor Extension Cable is used,
see Appendix 4.
1) Run speed check on hard surface road. If
SPEED is accurate, investigate Speed Sen-
sor on different wheel. (Cont. next page)
PROBLEM
1) NO DISPLAY LIGHTS WITH POWER ON.
2) ALL KEYBOARD LIGHTS ON AT SAME
TIME.
3) A DIGIT CANNOT BE ENTERED VIA
KEYBOARD.
4) AN INDICATOR LIGHT ON A KEY
WILL NOT ILLUMINATE.
5) CONSOLE DISPLAYS FLASHING "CAL"
WHENEVER VEHICLE ENGINE IS
STARTED.
6) CONSOLE DISPLAYS FLASHING "CAL"
WHENEVER MASTER SWITCH IS
TURNED ON OR OFF.
7) CONSOLE DISPLAYS FLASHING "CAL"
WHENEVER SPEED IS CHANGED.
8) "TIME" FUNCTION IS INACCURATE
OR DRIFTING.
9) ONE DISPLAY DIGIT HAS ONE OR
MORE MISSING SEGMENTS.
10) SPEED DISPLAY "0".
11) SPEED INACCURATE OR UNSTABLE
(WHEEL DRIVE SPEED SENSOR).
TROUBLESHOOTING GUIDE