Raven DCS 700 Скачать руководство пользователя страница 62

Страница: 62 / 62

RAVEN INDUSTRIES

VEN INDUSTRIES

LIMITED

LIMITED W

WARRANTY

ARRANTY

WHAT IS COVERED?

This warranty covers all defects in workmanship or materials

in your Raven Flow Control Product under normal use,

maintenance, and service.

HOW LONG IS THE COVERAGE PERIOD?

This warranty coverage runs for 12 months from the purchase date

of your Raven Flow Control Product. This warranty coverage

applies only to the original owner and is not transferrable.

HOW CAN YOU GET SERVICE?

Bring the defective part, and proof of date of purchase, to your

local dealer. If your dealer agrees with the warranty claim,

he will send the part, and proof of purchase to his distributor

or to Raven for final approval.

WHAT WILL RAVEN INDUSTRIES DO?

When our inspection proves the warranty claim, we will, at our

option, repair or replace the defective part and pay for return

freight.

WHAT DOES THIS WARRANTY NOT COVER?

Raven Industries will not assume any expense or liability for

repairs made outside our plant without written consent. We are

not responsible for damage to any associated equipment or

product and will not be liable for loss of profit or other

special damages. The obligation of this warranty is in lieu

of all other warranties, expressed or implied, and no person

is authorized to assume for us any liability. Damages caused

by normal wear and tear, mis-use, abuse, neglect, accident, or

improper installation and maintenance are not covered by this

warranty.

Содержание DCS 700































































Результаты поиска

Содержание DCS 700

Отзывы:

Похожие инструкции для DCS 700

Бренды по названию

Популярные бренды

Raven DCS 700, Инструкция по установке и обслуживанию

Результаты поиска

Содержание DCS 700

Отзывы:

Похожие инструкции для DCS 700

Бренды по названию

Популярные бренды