Raven DCS 700 Скачать руководство пользователя страница 29

Страница: 29 / 62

AUTOMATIC RATE +/-

This feature allows an increment to be set at which flow may be increased or

decreased while in automatic operation (rates 1-10). To select RATE +/- depress

for granular or

for liquid until DATA display flashes. To enter a

value depress

, increment value, and

. When using this feature the

preprogrammed application rates will be changed accordingly.

EXAMPLE:

If granular rate is to change by "10":

Enter a value of 10 for RATE +/-. When in RATES 1-10, each time the MANUAL

INC/DEC switch is positioned to INC, the RATE for that product will increase

by "10". Likewise, when positioned to DEC, the RATE will decrease by "10".

When POWER switch is on GRAN it increases or decreases granular rates, when

on GR/LI, it increases or decreases liquid rates.

LOW TANK ALARM

This feature will sound the alarm when the granular or liquid volume drops below

an entered value. If the granular or liquid volume falls below the low tank value

entered, the alarm will sound 8 beeps every 15 seconds and depending on which

tank is low the GRAN or LIQ display screen will flash "LEul". The alarm will

stop when a value equal to or greater than the Low Tank Alarm value is entered

into VOLUME/GRAN, VOLUME/LIQ or the MASTER switch is turned OFF. Entering "0"

into Low Tank Alarm disables the alarm.

Depress

for granular or

for liquid until the DATA display

flashes.

To enter a value, depress

, LOW TANK ALARM value, and

NOTE: Go to DATA MENU to silence audible alarm.

10. LOW LIMIT FLOW ALARM

The low limit feature allows the operator to set a minimum vol/min in the console

for the system to maintain regardless of vehicle speed. If the actual vol/min

reaches the set minimum vol/min, the control valve will stop closing to ensure

the low limit flow is maintained. When this occurs the console will be over

applying material until the actual vol/min exceeds the low limit flow value. An

audible and visual alarm will alert the operator. The visual alarm will display

"-LL-" in the GRAN or LIQ display screen. Depress

until the GRAN display

shows "Fr". LIQ display will show "FLGr". DATA display will show ".0". To advance

through the categories depress

Содержание DCS 700































































Результаты поиска

Содержание DCS 700

Отзывы:

Похожие инструкции для DCS 700

Бренды по названию

Популярные бренды

Raven DCS 700, Инструкция по установке и обслуживанию

Результаты поиска

Содержание DCS 700

Отзывы:

Похожие инструкции для DCS 700

Бренды по названию

Популярные бренды