Ravelli HR 160 SNELLA PLUS, Руководство по эксплуатации и обслуживанию

Страница: 66 / 188

Use and maintenance manual
HR 160 SNELLA PLUS
Rev.1 26/03/2018
EN
Pag.66
DESCRIPTION OF STRINGS:
Manuale d’uso e manutenzione modelli HYDRO
Pag.21
15/06/11
Il simbolo indicato seganla che è attiva la funzione crono. E’ comunque possibile effettuare la
programmazione del crono anche se questo risulta disattivato. Per renderla funzionante fare
riferimento al capitolo dedicato all’impostazione dell’orologio (7.3.4 MENU OROLOGIO).
N.B.: Durante la fase di accensione attraverso la funzione crono
attiva, la termostufa parte con potenza predefinita mas sima.
ESEMPIO:
Supponiamo che l’utente voglia effettuare un’accensione della stufa alle ore 08:30 con spegnimento impostato per le 21:30 per tutti
i giorni settimanali escludendo il week end (PROGRAMMA 1), supponiamo inoltre che l’utente desideri impostare una t.ambiente di
21°C. I passaggi da effettuare saranno i seguenti:
-
dal MENU CRONO confermare con il tasto OK ed impostare il programma che si vuole modifcare utilizzando i tasti 1 e 2;
- confermando con il tasto OK si passa all’impostazione dell’ora di accensione, impostare l’orario (hh:mm) utilizzando i tasti 1 e 2;
- confermando con il tasto OK si passa all’impostazione dell’ora di spegnimento, impostare l’orario (hh:mm) utilizzando i tasti 1 e 2;
- confermando con il tasto OK si passa alla scorrimento dei giorni della settimana, con i tasti 1 e 2 attivare/disattiavare i giorni desiderati
(Es. lunedì, martedì, mercoledì, giovedì e venerdì attivi);
- confermando con il tasto OK si passa alla scelta della tempetura ambiente desiderata, con i tasti 1 e 2 impostare i gradi (Es. 20° C).
A stufa accesa, quando la temperatura ambiente raggiunge il valore impostato la stufa passa in modalità MODULA o Comfort CLIMA
(se attivato par.7.3.6).
Descrizione Valori impostabili
START PROG - 1 Da OFF a 23:50 a step di 10’
STOP PROG - 1 Da OFF a 23:50 a step di 10’
GIORNO PROG - 1 Tra on/off per i giorni da lunedì a domenica
SET TAMB PROG - 1 Da EST a MAN
START PROG - 2 Da OFF a 23:50 a step di 10’
STOP PROG - 2 Da OFF a 23:50 a step di 10’
GIORNO PROG - 2 Tra on/off per i giorni da lunedì a domenica
SET TAMB PROG - 2 Da EST a MAN
DESCRIZIONE DELLE STRINGHE :
! IMPORTANTE
UTILIZZANDO QUESTA MODALITA’ E’ NECESSARIO VERIFICARE CHE DOPO OGNI
SPEGNIMENTO AUTOMATICO IL BRACIERE RIMANGA SEMPRE BEN PULITO IN MODO DA
GARANTIRE UNA CORRETTA ACCENSIONE AUTOMATICA.
7.3.6 Menu “CONFORT CLIMA“
Fig.24
Fig.25
Fig.26-A Fig.26-B
Let’s assume the user wants to switch on the stove at 08:30 with switch off set to 21:30 every day of the week except the weekend
(PROGRAM 1), also assuming the user wishes to set a room temp. of 21°C. The passages to implement are as follows:
- from the CHRONO MENU confirm using OK and set the program you wish to change using keys 1 and 2;
- confirm using the OK key and pass to the time switch on setting; set the time (hh:mm) using keys 1 and 2;
- confirm using the OK key and pass to setting the switch off time; set the time (hh:mm) using keys 1 and 2;
- confirm using the OK key and pass to scrolling down the days of the week; use keys 1 and 2 to activate/deactivate the days you
want (e.g. Monday, Tuesday, Wednesday, Thursday and Friday active);
- confirm with the OK key and pass to choosing the desired room temperature; with keys 1 and 2 set the degrees (e.g. 20° C).
With the stove on, when the room temperature reaches the value set, the stove passed to MODULATION or COMFORT CLIMATE
! IMPORTANT
USING THIS METHOD, IT IS NECESSARY TO VERIFY THAT AFTER EACH AUTOMATIC
SWITCH OFF THE GRATE IS ALWAYS VERY CLEAN TO GUARANTEE CORRECT
AUTOMATIC SWITCH ON.
“COMFORT CLIMATE“ menu
The symbol indicated signals the chrono function is active. It is however
possible to program the chrono also if this is deactivated. To make it
operational, refer to the chapter dedicated to clock setting.
N.B.: During the switch on phase, via the active chrono
function, the thermostat starts with the maximum default
power.
Set Prg.
User and Maintenance Manual HYDRO models
Page 21
15/06/11
The symbol indicated signals the chrono function is active. It is however possible to program the
chrono also if this is deactivated. To make it operational, refer to the chapter dedicated to clock
setting (7.3.4 CLOCK MENU).
N.B.: During the switch on phase, via the active chrono
function, the thermostat starts with the maximum default
power.
EXAMPLE:
Let’s assume the user wants to switch on the stove at 08:30 with switch off set to 21:30 every day of the week except the weekend
(PROGRAM 1), also assuming the user wishes to set a room temp. of 21°C. The passages to implement are as follows:
- from the CHRONO MENU confirm using OK and set the program you wish to change using keys 1 and 2;
- confirm using the OK key and pass to the time switch on setting; set the time (hh:mm) using keys 1 and 2;
- confirm using the OK key and pass to setting the switch off time; set the time (hh:mm) using keys 1 and 2;
- confirm using the OK key and pass to scrolling down the days of the week; use keys 1 and 2 to activate/deactivate the days you
want (e.g. Monday, Tuesday, Wednesday, Thursday and Friday active);
- confirm with the OK key and pass to choosing the desired room temperature; with keys 1 and 2 set the degrees (e.g. 20° C).
With the stove on, when the room temperature reaches the value set, the stove passed to MODULATION or COMFORT CLIMATE
(if activated par.7.3.6 ).
Description Settable values
START PROG - 1 From OFF at 23:50 in 10’ steps
STOP PROG - 1 From OFF at 23:50 in 10’ steps
DAY PROG - 1 Between on/off for days Monday to Sunday
SET ROOM T. PROG - 1 From EXT to MAN
START PROG - 2 From OFF at 23:50 in 10’ steps
STOP PROG - 2 From OFF at 23:50 in 10’ steps
DAY PROG - 2 Between on/off for days Monday to Sunday
SET ROOM T. PROG - 2 From EXT to MAN
DESCRIPTION OF STRINGS:
! IMPORTANT
USING THIS METHOD, IT IS NECESSARY TO VERIFY THAT AFTER EACH
AUTOMATIC SWITCH OFF THE GRATE IS ALWAYS VERY CLEAN TO GUARANTEE CORRECT
AUTOMATIC SWITCH ON.
7.3.6 “COMFORT CLIMATE“ menu
Fig.24
Fig.25
Fig.26-A Fig.26-B
Working Modulation
Set Prg.
Mon Tues Wed Thur Fri Sat Sun
Set Room
Comfort air
Delay C. Clima
User and Maintenance Manual HYDRO models
Page 21
15/06/11
The symbol indicated signals the chrono function is active. It is however possible to program the
chrono also if this is deactivated. To make it operational, refer to the chapter dedicated to clock
setting (7.3.4 CLOCK MENU).
N.B.: During the switch on phase, via the active chrono
function, the thermostat starts with the maximum default
power.
EXAMPLE:
Let’s assume the user wants to switch on the stove at 08:30 with switch off set to 21:30 every day of the week except the weekend
(PROGRAM 1), also assuming the user wishes to set a room temp. of 21°C. The passages to implement are as follows:
- from the CHRONO MENU confirm using OK and set the program you wish to change using keys 1 and 2;
- confirm using the OK key and pass to the time switch on setting; set the time (hh:mm) using keys 1 and 2;
- confirm using the OK key and pass to setting the switch off time; set the time (hh:mm) using keys 1 and 2;
- confirm using the OK key and pass to scrolling down the days of the week; use keys 1 and 2 to activate/deactivate the days you
want (e.g. Monday, Tuesday, Wednesday, Thursday and Friday active);
- confirm with the OK key and pass to choosing the desired room temperature; with keys 1 and 2 set the degrees (e.g. 20° C).
With the stove on, when the room temperature reaches the value set, the stove passed to MODULATION or COMFORT CLIMATE
(if activated par.7.3.6 ).
Description Settable values
START PROG - 1 From OFF at 23:50 in 10’ steps
STOP PROG - 1 From OFF at 23:50 in 10’ steps
DAY PROG - 1 Between on/off for days Monday to Sunday
SET ROOM T. PROG - 1 From EXT to MAN
START PROG - 2 From OFF at 23:50 in 10’ steps
STOP PROG - 2 From OFF at 23:50 in 10’ steps
DAY PROG - 2 Between on/off for days Monday to Sunday
SET ROOM T. PROG - 2 From EXT to MAN
DESCRIPTION OF STRINGS:
! IMPORTANT
USING THIS METHOD, IT IS NECESSARY TO VERIFY THAT AFTER EACH
AUTOMATIC SWITCH OFF THE GRATE IS ALWAYS VERY CLEAN TO GUARANTEE CORRECT
AUTOMATIC SWITCH ON.
7.3.6 “COMFORT CLIMATE“ menu
Fig.24
Fig.25
Fig.26-A Fig.26-B
Working Modulation
Set Prg.
Mon Tues Wed Thur Fri Sat Sun
Set Room
Comfort air
Delay C. Clima