Rauch SA 121, Руководство оператора

Страница: 74 / 90

Fig. 26: RWK 10 agitator
[1] Plastic element
[2] Universal joint
[3] Agitator finger
u Check the plastic element [1] for damage and wear.
In the event of increased wear, replace the plastic element.
u
Check the universal joint [2] for smooth operation.
u Check the agitator finger [3] for damage and wear.
Excessively worn agitator fingers can break and must be replaced.
The agitator finger must not be bent.
11.3 Cleaning the machine
n
Cleaning
u Clean the outlet ducts and the slide guide area from below only.
u
Only clean oiled machines at washing points fitted with an oil separator.
u When cleaning with high-pressure, never aim the water jet directly at warning signs, electrical
equipment, hydraulic components, and sliding bearings.
u
After cleaning, treat the dry machine, especially the coated spreading vanes and stainless
steel parts , with an environmentally friendly anti-corrosion agent.
w A suitable polishing kit can be ordered from authorized dealers for treating rust spots.
11. Maintenance and service
74
5901026 SA 121