Rauch SA 121, Руководство оператора

Страница: 38 / 90

7.3 Mounting the universal drive shaft on the machine
DANGER!
Danger of pulling in on the rotating universal drive shaft
Installing and removing the universal drive shaft while the motor is running may cause serious
injuries (crushing, pulling into the rotating shaft).
u
Turn the tractor engine off and remove the ignition key.
u
Make sure that the universal drive shaft cover is in good condition.
NOTICE!
Material damage due to an unsuitable universal drive shaft
The machine is equipped with a universal drive shaft that is designed according to the device and
performance.
The use of incorrectly dimensioned or inadmissible drive shafts, for instance without guard or
suspension chain, may cause personal injury or lead to damage to the tractor and/or the machine.
u
Use only universal drive shafts approved by the manufacturer.
u
Follow the directions in the operator’s manual of the universal drive shaft manufacturer.
ü Check the mounting position. The drive shaft end that is marked with a tractor symbol must point
to the tractor.
u Draw the lubricating nipple along the universal drive shaft cover.
u Rotate the plastic ring in the bayonet lock
of the universal drive shaft cover by means
of a screwdriver.
u Pull the universal drive shaft cover
backwards.
Fig. 11: Opening the universal drive shaft cover
7. Commissioning
38
5901026 SA 121