Rauch SA 121, Руководство оператора

Страница: 41 / 90

DANGER!
Risk of tipping or falling
There are no anchor or lifting points provided on the attachments or the frame of the machine.
If the machine is lifted or moved on the attachments or the frame, it may tip over or fall. There is a
risk of death.
u
Fasten the machine to a pallet.
• The machine is installed at the three-point linkage (rear power lift) of the tractor.
n
Mounting instructions
• Always install the machine horizontally.
• The bottom and upper link pins must be secured with linch pins or spring clips.
• Attach the machine according to the values in the spreading material chart. This guarantees
correct cross-distribution of the spreading material.
• Any oscillating movements during spreading are to be avoided. Make sure that the machine does
not have too much play to the sides.
Fig. 15: Secured pin
n
Setting the mounting height
The information on the mounting height refers to the distance between the lower edge of the
spreading disc and the ground with a horizontally mounted machine. The specified mounting height
[dimension
A ] is 50 cm .
u
Measure the distance between the lower edge of the frame and the ground.
w The distance must be 27 cm [dimension B ].
7. Commissioning
SA 121 5901026
41