Rauch SA 121, Руководство оператора

Страница: 73 / 90

Replace these parts if they show signs of wear, deformation, holes, or aging. Otherwise, the spreading
pattern will not be correct.
The durability of wear parts depends, among other things, on the material being spread.
11.2.2 Checking the screw connections
n
Screw connections
Screw connections have been tightened to the specified torque and locked at the factory. Vibrations
and shocks, in particular during the initial operating hours, can loosen screw connections.
u Check all screw connections for tightness.
Some components are mounted with self-locking nuts.
u
When mounting these components, always use new self-locking nuts.
Observe the tightening torques of the standard screw connections.
• See 14.1 Torque value
11.2.3 Checking the agitator
n
RWK 8 agitator
u
Check the agitator for damage and wear.
Fig. 25: RWK 8 agitator
n
RWK 10 agitator
u If the spreading material no longer flows out evenly from the metering opening, replace the
agitator finger.
11. Maintenance and service
SA 121 5901026
73