Rauch SA 121, Руководство оператора

Страница: 71 / 90

11 Maintenance and service
11.1 Safety
Please note the warnings in the chapter 3 Safety
Take particular note of the instructions in the section. 3.8 Maintenance and service
Observe the following instructions in particular:
•
Welding and work on the electrical and hydraulic systems is to be carried out by qualified
technicians only.
• There is a risk of tipping when working at the lifted machine. Always secure the machine using
suitable supports.
• Always use both eyelets in the hopper for lifting the machine by means of hoisting gear.
• There is a risk of crushing and shearing at power-operated components. Make sure that there is
no one in close proximity to the moving parts during maintenance.
• Spare parts must at least comply with the technical standards specified by the manufacturer. This
is assured with original spare parts.
• Before starting any cleaning, maintenance, or repair work, and when troubleshooting, switch off
the tractor's engine, remove the ignition key, and wait until all moving parts of the machine have
come to a stop.
• By controlling the machine with an operating unit, additional risks and hazards due to externally
operated components may arise.
○
Disconnect the power supply between the tractor and the machine.
○ Disconnect the power supply cable from the battery.
• Repairs may ONLY be carried out by instructed and authorized workshops .
n
Maintenance plan
Task
Before operation
After operation
After the first X hours After the first X hours After the first X hours
Every X hours Every X hours Every X hours Every X hours
Quarterly
After the first X years
At the beginning of the season
At the end of the season
Value (X)
10 50
100
30 50 50
100
10
Cleaning
Cleaning X
11. Maintenance and service
SA 121 5901026
71