Rauch QUANTRON-A, Инструкция по эксплуатации

Страница: 71 / 120

Operation QUANTRON-A
65
4
4.7.3 +/- application rate
In this menu, you can specify the percentage of quantity change for standard
spreading.
The base (100%) is the preset value for the opening of the metering slider.
Defining the quantity reduction:
1.
Open the menu Machine settings > +/- appl. rate (%) .
2. Enter the percentage by which you wish to change the application rate.
See chapter
4.14.2: Input of values using the cursor keys, page 88 .
3. Press the enter key .
4.7.4 Idle measurement signal
Here you can activate or deactivate the signal tone for the accomplishment of the
idle measurement.
1. Highlight the Idle measurement signal menu item.
2. Confirm the option by pressing the enter key .
 The display shows a tick.
 There is an acoustic signal for each start of an automatic idle
measurement.
3. Deactivate the option by pressing the enter key once more.
 The tick disappears.
NOTICE
During operation, you can use the F2/F3 function keys to change the application
rate by the factor of +/- application rate at any time.
With the C 100 % key , you can restore the pre-settings.