Rauch QUANTRON-A, Инструкция по эксплуатации

Страница: 52 / 120

Operation QUANTRON-A 4
46
Minimum factor
The machine control system automatically sets the minimum factor to one of
the following values, according to the flow factor value entered:

The minimum factor is 0.2 if the input value is smaller than 0.5.

The minimum factor is reset to 0.4 as soon as you enter a value
exceeding 0.5.
Displaying the flow factor with the M EMC function (AXIS only)
Enter a default value for the flow factor in the Flow factor sub-menu. However
during spreading and with activated M EMC function , the control unit controls
the left and right metering sliders separately. Both values are displayed on the
operating screen.
When pressing the
Start/Stop key, the display updates the indicated flow factor
with a slight delay. The display is then updated at regular intervals.
Figure 4.11: The left and right flow factors are controlled separately
(M EMC function activated)
[1] Flow factor for the right metering slider opening
[2] Flow factor for the left metering slider opening
2
1