Rational iVario IVP2-S, Руководство по эксплуатации

Страница: 44 / 96

6 | Manual cooking
44 / 96 Operating instructions
Filling the oil cart
a
The drain opening is closed.
1. Open the lid of the oil cart.
2. Pour the desired amount of oil or fat into the oil cart. Observe the minimum and maximum permissible fill
quantities of the oil cart from 15-49 L.
Melt solid fat
a
There is at least 15 litres of solid fat in the oil cart.
1. Set the heater switch from 0 to I.
>
The fat is heated at 80 °C and becomes liquid. The pump does not work while the heater is running.
2. When the fat is liquid, set the heater switch from I to 0.
>
The heating is switched off. Now you can fill the pan with fat.
Filling the pan
a
There is liquid oil or fat in the oil cart.
1. Take the oil cart to the unit.
2. Swing the outlet pipe over the pan, so that oil or grease can safely run into the pan.
3. Apply the parking brakes of the oil cart.
4. Connect the oil cart to the mains using the power cable.
5. Turn on the oil cart.
6. Set the pump switch from 0 to I.
>
The oil cart pumps oil or fat into the pan.
7. When the desired amount of oil or fat is in the pan, switch the pump switch from I to 0.
8. Disconnect the oil cart from the power supply, release the parking brakes and take the oil cart to its storage
location. WARNING! Risk of burns! When hot oil or fat is pumped into the pan, the outlet pipe becomes
very hot. Only handle the oil cart by the handles.
Emptying the pan
a
The drain opening is closed.
1. Take the oil cart to the unit at the level of the pan outlet.
2. Apply the parking brakes of the oil cart.
3. Open the lid of the oil cart and place the filter in the opening.
4. WARNING! Risk of burns! If the pan is tilted too quickly, hot oil can splash on it. Wear your personal
protective equipment to protect yourself from getting burnt. Carefully tilt the pan and make sure that the oil
or fat runs exactly into the opening of the oil cart. Make sure that the filter in the oil cart does not overflow.
This is the only way to ensure that all oil or fat is filtered.
5. Tilt the pan completely until it is completely empty.
6. Remove the filter and clean it.
7. Close the lid of the oil cart.
8. Disconnect the oil cart from the power supply, release the parking brakes and take the oil cart to its storage
location.
6.5.5 Melt solid fat
If you do not fill the pan with the oil cart [ } 43], you can melt solid fat as follows:
1. Place the solid fat in the pan. Do not exceed the minimum and maximum fill levels [ } 17].
2. Select the manual deep fry mode.