15 | Automatic cleaning - iCareSystem
90 / 112
Operating instructions
>
You will be asked if you really want to cancel the clean. It will be displayed how long the process will be
aborted.
2. Press the button
>
Remove the Active Green cleaner tabs.
3. Open the cabinet door.
4.
WARNING! Danger of chemical burns! Wear tight-fitting protective glasses and chemical-safe gloves for
preparation and protection when handling Active Green cleaner tabs.
Remove the Active Green cleaner
tablets from the cooking cabinet and dispose of them.
5. Rinse the cooking cabinet with water to remove residues of the Active Green cleaner tabs.
6. Close the cooking cabinet door.
>
The process is still aborted.
>
Once the abort is complete, you will be asked to check the cooking cabinet for residues of the Active Green
cleaner tabs.
7. Open the cabinet door.
8. Close the cooking cabinet door.
>>
The unit is now ready to be used again. The start screen will appear.
TIP
If there is a power outage during the automatic clean, the automatic clean will be interrupted. When the power
supply is restored, the automatic clean will continue.
15.7
Forced cleaning
If you have activated a forced cleaning process, you will be asked to clean the unit after a defined period of time.
You cannot work with the unit again until the cleaning has been performed.
1. Press the button
2. Press the button
Cleaning
3. Press the button
Forced cleaning
4. To activate the forced cleaning process, press the button:
ON
5. To set how long you would like to pass before you receive a reminder to clean the unit, press the button:
Time
until cleaning reminder
Please note that you should not indicate the operating time here, but rather the time
that you want to pass until the reminder.
6. Select a value from 1 to 24 hours on the scale.
7. To set the number of hours the cleaning can be pushed back until the reminder, press the button:
Forced
cleaning delay time
8. Select a value from 1 to 24 hours on the scale.
>>
The footer shows how many operating hours remain until cleaning needs to be carried out.
15.8
Cleaning plan
With the help of a cleaning plan, you can determine on which days of the week a forced cleaning [
90] process
must be carried out.
1. Press the button
2. Press the button
Cleaning
3. Press the button
Cleaning time schedule
4. To define how the unit should behave in case of a cleaning reminder, press the button:
Cleaning time schedule
time
5. If you do not want to receive any cleaning reminders, press the button:
OFF
6. If you do not want a warning to be displayed at the time of cleaning, press the button:
Warning
7. If the unit is to clean itself as soon as a cleaning request appears, press the button:
Forced cleaning