Raritan PARAGON II Series, Руководство пользователя

Страница: 16 / 258

How-To: Paragon Essentials
xvi
Field Settings returning to factory defaults
cleared, but the data of active channels is rebuilt
automatically after the reset
4. Now reset the selected items. Press O (alphabetical character) -->
type
yes
--> press Enter .
5. The system will log out all of logged-in users and return the selected
settings to factory defaults.
See System Reset (on page 118) for details.
Case 7. Using the Integrated Card Reader
Purpose: To pass the login authentication configured in specific servers
that require the input of the data stored in an appropriate smart card. This
function requires the card reader-enabled firmware and devices, including
the Paragon switch with firmware 4.3 or above, P2-EUST/C and
P2CIM-AUSB-C.
1. Log in to the Paragon system utilizing a user station with an integrated
card reader (P2-EUST/C).
2. Access the server where the appropriate authentication software and
driver have been installed and configured properly and which is
connected to the Paragon system via P2CIM-AUSB-C.
3. When you see the blank screen or a message prompting you to insert
the card, insert your smart card into the card reader of the user station.
4. Depending on the configuration of the target server or authentication
software, you may also need to enter a PIN.
5. After the login authentication and authorization has been completed,
you can start working on the server.
6. When you complete your work, press the hot key (default: Scroll Lock)
twice quickly to trigger the OSUI.
See Using the OSUI for Initial Configuration (on page 36) for
details.
7. Press Shift + F9 to disconnect the server, and then remove the card.
See Using the Card Reader (on page 94) for details.
The card's authentication data is not stored in the Paragon system so you
must repeat Steps 3 to 5 if you want to access the same server again.