Raritan PARAGON II Series, Руководство пользователя

Страница: 231 / 258

Appendix E: Other Raritan Components Working with Paragon II
209
Dominion KX II Integration
Dominion KX II is a digital KVM switch that can be directly managed by
CC-SG. If you do not have the P2SC device, you can connect the Paragon
II system to a KX II device that is managed by CC-SG so that Paragon II is
accessible from CC-SG. For complete compatibility, it is recommended
that the KX II device connected to Paragon II is running version 2.1 or later.
Note: Paragon II can also be accessed remotely over IP through the
P2-USTIP. However, P2-USTIP does not support integration with
authentication/authorization platforms (AA), such as LDAP or Active
Directory. The KX II does support these and other AA platforms.
To connect the Paragon II system to KX II
1. Check whether the user station that you want to connect to KX II is
implemented with version 4.6 firmware or later. If not, upgrade it. See
Firmware Upgrade (on page 164) for upgrade instructions. The user
station can be one of these:
ƒ
P2-UST
ƒ
P2-EUST
ƒ
P2-EUST/C
2. Connect a compatible DCIM to this user station. If the system is a two-
or three-tier system, ensure the user station is one of those connected
to the Base Unit (first tier).
Only two types of DCIMs are supported in this integration:
ƒ
If using DCIM-USB-G2, plug its connectors into the USB and video
ports on the user station.
ƒ
If using DCIM-PS2, plug its connectors into the PS/2 and video
ports on the user station.
3. Connect the user station to a KX II device via a Cat5 UTP cable up to
150 feet (45 m).
ƒ
Plug one end of the cable to the DCIM's RJ-45 port and the other
end to one of the channel ports on the KX II device.
4. If you want to have more paths to access the same Paragon II system
in KX II or CC-SG, repeat Steps 1 to 3 to connect additional user
stations to KX II.