How-To: Paragon Essentials
xxi
3. Unzip the downloaded file. There are a file named
ParagonUpdate_xxx.exe (xxx represents the version) and a firmware
file for the user station. If using the P2-EUST, the firmware file is
named EUST-xxx.hex. If using the P2-UST, the firmware file is named
V5-xxx.hex (xxx represents the version).
4. Double click “ParagonUpdate_xxx.exe” to execute the program.
5. Enter the information about the user station in the
Paragon Update
utility. For example:
In
the
Name
column, type
P2-EUST-1
In
the
IP address/Serial
column, select <Default Serial>
In
the
Port
column, type
2
. This represents the serial port—COM2
6. Ensure the checkbox before the user station is selected (
).
7. Click
Load Hex File
to select the firmware file.
8. To start the upgrade, click
Send To Paragon
-->
Yes
.
9. Once the upgrade is completed, a message appears.
See
General Update Procedure
(on page 164) and
Paragon
Manager User Guide
for details. This user guide is available on Raritan
website's
Firmware and Documentation section
(http://www.raritan.com/support/firmware-and-documentation/).
Содержание PARAGON II Series
Страница 1: ...Copyright 2009 Raritan Inc PII 0S v4 6 E May 2009 255 30 6000 00 Paragon II User Guide Release 4 6 ...
Страница 22: ......
Страница 28: ...Chapter 1 Introduction 6 User Station P2 EUST CIM P2CIM APS2 P2 EUST C Front and Rear Sides ...
Страница 257: ......
