Raritan PARAGON II Series, Руководство пользователя

Страница: 218 / 258

Appendix D: Connecting Serial Devices to Paragon II System
196
Installing a Serial CIM
Take these steps to attach a serial CIM to the serial port of a serial device
or server and to your Paragon II system.
Installing P2CIM-SER or P2CIM-SER-EU
The installation of P2CIM-SER or P2CIM-SER-EU is quite easy.
To install a Serial CIM
1. Connect the CIM to a serial port on the serial device or computer,
using its serial DB9 connector.
2. Connect the CIM to the system using a standard Cat5 UTP cable.
3. Plug the CIM's USB connector into a powered USB port, or into a
separately available Raritan PWR-SER-4 power adapter, to obtain
power.
For detailed information on the CIMs, see Paragon and Dominion KX
Serial Device CIM User Guide , which is downloadable from the Raritan
website (http://www.raritan.com).
To download the Paragon and Dominion KX Serial Device CIM
User Guide:
1. Use your browser to visit Raritan's Firmware and Documentation
section
(http://www.raritan.com/support/firmware-and-documentation/).
2. On the left pane, click Paragon II > Other Support Files.
3. On the right pane, click P2CIM-SER User Guide.
4. Click Paragon II CIM Serial User Guide to open it.
5. (Optional) You can save it on your computer by clicking the Save icon.
Installing AUATC
1. Run an appropriate cable from AUATC's DB25 female DTE connector
to the device's serial port. The type of cable will depend on what type
of connector the port is and whether it's pinned as DTE (for a data
source/destination such as a server) or DCE (for a
data-communicating device such as a modem). Here are the product
codes of some cables we recommend if the port is:
ƒ
DB9 male DTE (most PCs, some routers, and so on)
ƒ
DB25 male DTE (some older PCs, routers, and so on)
ƒ
DB25 female DCE (many external modems, and so on)