11
fire or fater a long exposure to a high temperature
heat source.
5. Do not charge the battery pack in an outdoor or
humid environment.
BATTERY PACK STORAGE
1. To ensure good battery pack storage, keep it
within the specified temperature range.
2. If the equipment is not used for a long time, re-
move and charge the battery pack before storage.
3. It is recommended to place the battery and char-
ger in the tool’s box during storage.
4. Battery should be stored in a dry environment
away from any inflammables.
CHARGER USE AND CARE
CAUTION!!
Use the original charger to ensure the safety of the
equipment.
Only use a charger in good condition and never try to
use a defective charger.
Make sure that the supply voltage matches the rated
voltage of the charger nameplate.
Disconnect the charger from the power supply when
not in use.
Do not use the charger in an outdoor or humid envi-
ronment. The entry of dirt or water will increase the
risk of electric shock.
The charger shall only be used to charge the original
battery, otherwise it may result in personal injury and
cause a fire.
Avoid any damage to the charger; a damaged charg-
er may increase the risk of electric shock.
Do not use chargers on flammable surfaces (e.g.
paper, textiles)
If the power supply cord of the charger is damaged, it
must be replaced by qualified personnel.
MAINTENANCE
WARNING!!
Disconnect battery before any maintenance
GENERAL CLEANING AFTER EACH SPOOL IS
FINISHED
The tool should be wiped with a wet cloth.
Use a paintbrush or similar to brush away foreign
matters in the guide lane, twister wheel and feeding
tray.
! Do not use any cleaning agent, as this may cause
permanent damage to the tool.
OIL & LUBRICATION AFTER EACH WORK DAY
Use good multigrade oil, for example 3-IN-ONE
or 15W-40. Lubricate each movable joint and the
cutter, see picture A13.
FEEDING DEVICE REPLACEMENT
When the feeding wheel no longer feeds the wire,
a replacement is recommended. Kit part number:
5001602
TWIST & HOOK DEVICE DEVICE REPLACEMENT
In case the twisting wheel stops twisting or you end
up with bad twists, a replacement is recommended.
Kit part number: 5001603
BRAKE DEVICE REPLACEMENT
When the O-ring between the rotating brake and the
fixed brake hub is worn out, a replacement is recom-
mended. Kit part number: 5001604
SPARE PART LIST
KIT A: CUTTING DEVICE Art No 5001601
POSITION
DESCRIPTION
QUANTITY
76.
Fixed blade
1
77.
Blade guide block
1
81.
Mobile blade
1
KIT B: FEEDING DEVICE Art No 5001602
POSITION
DESCRIPTION
QUANTITY
80.
Rubber wheel
3
64.
Circlip
3
KIT C: TWIST & HOOK DEVICE Art No 5001603
POSITION
DESCRIPTION
QUANTITY
61.
Bundle wheel
1
62.
Hex screw
1
68.
Main hook
1
69.
Pin
1
54.
Guide block
1
KIT D: BRAKE DEVICE Art No 5001604
POSITION
DESCRIPTION
QUANTITY
5.
Head Screw
1
6.
Flat Gasket
1
8.
Ring
1
11.
Band
1
KIT E: SCISSORS Art No 5001605
ADDITIONAL SERVICE INFORMATION
Look at www.rapid.com
WARRANTY
I. WARRANTY PERIOD
This RAPID product is guaranteed for three (3) years
under the manufacturer’s warranty (or commercial
warranty), from the delivery date to the end user
(wearing parts, accessories, batteries, and chargers
excluded). The batteries and chargers are guaranteed
for two (2) years. To extend the tool warranty to five
(5) years, please register online at www.rapid.com
or scan the QR code. Have your tool and purchase
receipt ready.
II. WARRANTY CONDITIONS
Any products used differently from intended or oper-
ated in conditions different from the intended ones,
especially regarding the points stated in this user’s
manual, cannot be claimed under the manufacturer’s
warranty. The warranty also doesn’t apply in the
event of shock, fall, negligence, lack of supervision
and/or maintenance. Any alteration, transformation
or modification carried out on the products by the
end user invalidates the warranty. The wearing parts,
accessories and/or consumables are never covered
by the warranty.
Considered as accessories, wearing parts, or con-
sumables:
the transport case and packaging, the wire spools,
and the spare parts kits (KIT A to KIT E) included in
this user’s manual.
III. CLAIM UNDER WARRANTY
The warranty period starts from the delivery date to
the end user.
In the event of a claim under warranty, the product
must be returned in its original case (batteries &
charger included), along with a copy of the original
dated receipt.
SPOOL DISPOSAL
Do not dispose of the empty spools with the usual
domestic waste. Empty spools are to be recycled as
plastic at a local collection point.
BATTERY DISPOSAL
Exhausted batteries are to be removed from the
appliance and safely disposed of.
Batteries may not be disposed of with the usual
domestic waste, they may contain toxic heavy metals
and are subject to hazardous waste regulations.
For this reason, dispose of used batteries at a local
collection point.
2012/19/EU
EN Waste Electrical and Electronic Equip-
ment (WEEE)
Electrical and electronic devices contain materials
and substances that can have damaging effects
on human health and the environment. This symbol
indicates that this device must not be treated as un-
sorted municipal waste, but must be collected sep-
arately! Dispose of the device via a collection point
for the recycling of waste electrical and electronic
equipment within the EU and in other European
countries that operate separate collection systems
for waste electrical and electronic equipment. By
disposing of the device in the proper manner, you
help to avoid possible hazards for the environment
and public health that could otherwise be caused
by improper treatment of waste equipment. The
recycling of materials contributes to the conservation
of natural resources.
BHX50 AKKU-BINDEGERÄT
Übersetzung der Originalanleitung
BESCHREIBUNG DER GERÄTETEILE
A. Bindegerät
A1. Führungshaken
A2. Führungsblech
A3. Verdrillungsrad
A4. LED-Leuchte
A5. Auslösehebel
A6. Spulenhalter
A7. Spule
BHX50–BATTERY Tying machine_Manual_20220901.indd 11
BHX50–BATTERY Tying machine_Manual_20220901.indd 11
5/9/22 9:36 a. m.
5/9/22 9:36 a. m.
