Ransomes ZE Series, Руководство по безопасности, эксплуатации и техническому обслуживанию

Страница: 24 / 136

GB-22
RANSOMES COMMANDER 3520
SAFETY, OPERATORS & MAINTENANCE MANUAL
6 CONTROLS
6.18a GAUGES
Analogue Display
J. Hour meter this gauge registers the total
number of hours the engine has run.
K. Fuel level indicator Situated to the left of
the combination gauge. The fuel level
indicator shows the amount of fuel in the
fuel tank.
L. Water temperature indicator Situated to
the right of the combination gauge. The
water temperature gauge indicates the
engine coolant temperature. If the
temperature rises excessively, check the
coolant level in the radiator expansion
bottle and radiator. Also check that the
radiator mesh screen is clear of debris.
6.19 4WD REVERSE
To reverse in 4 Wheel Drive, switch "C" should be
engaged & illuminated.
Using the heal of the left foot depress switch "H"
Pushing down the rear plate of the traction pedal
with the right foot moves the machine in reverse.
The further the pedal is depressed the faster the
machine will move. The pedal automatically returns
to the neutral position when foot pressure is
released.
To disengage 4 Wheel Drive reverse, remove left heal
from switch "H".
M. Starter switch situated to the left of the
gauges. The starter key should be turned
clockwise to the preheat’ (No.2) position to
heat the glow plugs, when the red warning
lamp goes out on the combination gauge
turn the starter key clockwise to the ‘start’
(No.3) position to start the engine. After
starting the key should be released and
allowed to return automatically to the ‘on’
(No.1) position for normal running.
Analogue Display
Digital Display