Ransburg 80100 Series, Руководство по обслуживанию

Страница: 8 / 60

9060 High Voltage Controller - Safety
3 CP-13-05.3
AREA
Tells where hazards
may occur.
HAZARD
Tells what the hazard is.
SAFEGUARDS
Tells how to avoid the hazard.
Spray Area
Fire and/or explosion.
Electrostatic arcing MUST be prevented.
The 78789 control panel, LEPS5001 power sup-
ply and all other electrical equipment must be
located outside Class I or II, Division 1 or 2 haz-
ardous areas, in accordance with NFPA-33.
Test only in areas free of flammable or combus-
tible materials.
The current overload sensitivity MUST be set as
described in the OVERLOAD ADJUSTMENT
Procedures section of this manual.
Protection
against inadvertent arcing that is capable
of causing fire or explosion is lost if the cur-
rent overload sensitivity is not properly
set.
Frequent power supply shutdown indicates
a problem in the system which requires correc-
tion.
Always turn the control panel off prior to flush-
ing, cleaning, or working on spray system equip-
ment.
Ensure that the control panel is interlocked with
the ventilation system and conveyor in accord-
ance with NFPA-33, EN 50 176.
Have fire extinguishing equipment readily availa-
ble and tested periodically.
General Use and
Maintenance
Improper operation or mainte-
nance may create a hazard.
Personnel must be properly
trained in the use of this equip-
ment.
Personnel must be given training in accordance
with the requirements of NFPA-33, EN 60079-0.
Instructions and safety precautions must be
read and understood prior to using this equip-
ment.
Comply with appropriate local, state, and nation-
al codes governing ventilation, fire protection,
operation maintenance, and housekeeping. Ref-
erence OSHA, NFPA-33, EN Norms and your
insurance company requirements.