Ranger Wheel Guardian RV1, Инструкция по установке и эксплуатации

Страница: 33 / 80

RV1 Wheel Guardian™ Tire Changer
33
P/N 5900089 — Rev. A — March 2019
Placing a Wheel on the Turntable
When you want to take the Tire off of a Wheel (called demounting the Tire), you must first put the
Wheel onto the Tire Changer Turntable.
To put a Wheel onto the Turntable :
1. Make sure you are wearing ANSI-approved eye protection: safety glasses, face shield, or goggles.
2. Review the requirements in
Before You Change a Tire
.
3. Move the Wheel onto the Tire Lift.
4. Press and hold the Up Foot Pedal.
The Tire Lift rises and moves the Wheel over the Turntable.
Make sure the Narrow Side is facing up.
5. Release the Up Foot Pedal and then put the hole in the middle of the Wheel directly over the
Turntable.
6. Align a Lug Hole in the Wheel over the Alignment Pin on the Turntable.
Not necessarily to scale. Not all components shown.