Ranger Wheel Guardian RV1 Скачать руководство пользователя страница 21

Страница: 21 / 80

RV1 Wheel Guardian™ Tire Changer

P/N 5900089 — Rev. A — March 2019

Operation

This section describes how to use your Tire Changer.

⚠

DANGER

Do not proceed with using the Tire Changer to change a Tire unless you have
formal training and have read the entire

Installation and Operation Manual

. Tire

changing must only be done by trained personnel.

Failure to understand and

follow proper procedures will result in injury or death

Usage Precautions

Keep the following in mind while you use your Tire Changer:
•

Never perform service on an

inflated

Tire;

always

fully deflate the Tire before beginning work.

•

Never mount or change damaged Tires or Wheels.

•

Always secure the Wheel to the Tire Changer or place in a safety cage before inflating the Tire.

•

Make sure new employees are trained and supervised in the performance of their duties.

•

Make sure all employees receive specific training in Tire demounting and mounting before they are
allowed to use the Tire Changer, that their training is verified through a testing program, and that all

training is documented. All others, including children and untrained personnel, must be kept at

least 30 feet away from the Tire Changer.

•

The RV1 Tire Changer may work differently than other Tire Changers you have

used

. BendPak Ranger recommends practicing with non-customer Tires to get familiar with how

the product works

before

starting work on customer Tires.

•

Make a visual inspection of the Tire Changer

before each use

. Do not operate the unit if you

find any issues. Instead, take it out of service, then contact your dealer, visit

www.bendpak.com/support/

, or call

(805) 933-9970

•

When using the Tire Changer, you

must

wear appropriate work clothing: leather gloves, non-skid

steel-toed work boots, and an industrial back belt. Keep hair, jewelry, and clothing away from the

unit.

•

When using the Tire Changer, be careful of your hands, as there are multiple pinch point dangers

on the unit. Do not rest your hands on any part of the Tire Changer while using it.

•

When using the Tire Changer,

the operator must wear ANSI-approved eye protection

at all times

: safety glasses, a face shield, or protective goggles.

⚠

WARNING

Always wear ANSI-approved eye protection. An accident could cause significant
injuries to your eyes.

Содержание Wheel Guardian RV1
















































































Результаты поиска

Содержание Wheel Guardian RV1

Отзывы:

Похожие инструкции для Wheel Guardian RV1

Бренды по названию

Популярные бренды

Ranger Wheel Guardian RV1, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Wheel Guardian RV1

Отзывы:

Похожие инструкции для Wheel Guardian RV1

Бренды по названию

Популярные бренды