Ranger Wheel Guardian RV1, Инструкция по установке и эксплуатации

Страница: 22 / 80

RV1 Wheel Guardian™ Tire Changer
22
P/N 5900089 — Rev. A — March 2019
• Keep the work area clean and well lit. Dirty, cluttered, and dark work areas increase the chances of
an accident happening.
• Do not try to access the inside of the unit unless instructed to do so by Ranger Support. There are
no user serviceable parts inside.
⚠
WARNING Be especially careful when inflating Tires. This is a dangerous time when using a
Tire Changer. If the Tire and Wheel are mismatched or there is a defect in the Tire, it
could explode, injuring or killing you or anyone nearby.
Never lean over the
Tire when inflating a Tire . Move away from the Tire during inflation.
• Do not use the unit in a wet environment or expose it to rain or excess moisture.
• If an extension cord is necessary, a cord with a current rating equal to or more than that of the
equipment must be used. Cords rated for less current than the equipment may overheat. Care
should be taken to arrange the cord so that it will not be tripped over or pulled.
• Do not use anything flammable on the Beads or Rim surfaces for lubrication purposes; instead,
use non-flammable vegetable or soap-based rubber lubricant.
• Do not use the unit in the vicinity of open containers of flammable liquids.
• Clean the unit according to the instructions in Maintenance .
• Read the entire
Installation and Operation Manual
before using the unit.